Клуб Дальномер
https://rangefinder.ru:443/club/

Пропал Tool palette
https://rangefinder.ru:443/club/viewtopic.php?f=10&t=18307
Страница 1 из 1

Автор:  maxx70 [ 12 окт 2018, 16:29 ]
Заголовок сообщения:  Пропал Tool palette

Вложение:
Комментарий к файлу: Tool palette
lppKd3aeh3E.jpg
lppKd3aeh3E.jpg [ 60.15 КБ | Просмотров: 3270 ]


Коллеги, помогите. Некорректно работает Nikon Scan 4.0.
Жму на кнопку Tools, дабы вызвать Tool palette1, но ничего не происходит. Нечем настраивать стало. ((
Ничего не менял, кроме монитора. Временно поставил 19-дюймовый простой офисный, 24 дюйма (который был HD) приказал долго жить. И после этого заметил. Но это же бред, что от монитора зависит панель программы?
ОС -Windows_7 64 bit.

Автор:  jim bim [ 12 окт 2018, 16:33 ]
Заголовок сообщения: 

пленка в сканере?

Автор:  maxx70 [ 12 окт 2018, 16:43 ]
Заголовок сообщения: 

С пленкой тоже самое.

Вложения:
2018-10-12_16-42-46.png
2018-10-12_16-42-46.png [ 123.13 КБ | Просмотров: 3255 ]

Автор:  Sandy Arnold [ 12 окт 2018, 17:03 ]
Заголовок сообщения: 

Разрешение экрана проверяли? А вдруг...

Автор:  maxx70 [ 12 окт 2018, 17:07 ]
Заголовок сообщения: 

Sandy Arnold писал(а):
Разрешение экрана проверяли? А вдруг...

Я же писал - монитор другой, с меньшим разрешением. После этого и пропало. ))
Только никак в толк не возьму - как разрешение экрана может повлиять?

Автор:  Gallagher [ 12 окт 2018, 17:17 ]
Заголовок сообщения: 

Уехала панелька за пределы экрана :)

Цитата:
1. Start > Run > regedit.exe
2. Quit Nikon Scan if you have not already done so.
3. Locate: HKEY_USERS > (long ID string; try each until you find the following) > Software > Nikon > Nikon Scan Source > 4.0 > General
4. Rename the ToolPaletteStates to something else (e.g. ToolPaletteStates2) by right-clicking and selecting Rename. Keep this window open for now.
5. Open Nikon Scan and ensure your palette is shown on-screen.
6. Go back to the registry editor and rename ToolPaletteStates back to the original name.
7. Quit Nikon Scan.
8. Open Nikon Scan and ensure that your tool palettes are still on-screen. You can now close the registry editor.
9. You're done! Should your tool palettes ever disappear, repeat these steps to reset the palette locations to their default positions within the program window.

Автор:  maxx70 [ 12 окт 2018, 17:32 ]
Заголовок сообщения: 

Gallagher писал(а):
Уехала панелька за пределы экрана :)

Цитата:
1. Start > Run > regedit.exe
2. Quit Nikon Scan if you have not already done so.
3. Locate: HKEY_USERS > (long ID string; try each until you find the following) > Software > Nikon > Nikon Scan Source > 4.0 > General
4. Rename the ToolPaletteStates to something else (e.g. ToolPaletteStates2) by right-clicking and selecting Rename. Keep this window open for now.
5. Open Nikon Scan and ensure your palette is shown on-screen.
6. Go back to the registry editor and rename ToolPaletteStates back to the original name.
7. Quit Nikon Scan.
8. Open Nikon Scan and ensure that your tool palettes are still on-screen. You can now close the registry editor.
9. You're done! Should your tool palettes ever disappear, repeat these steps to reset the palette locations to their default positions within the program window.



Помогло, однако! Неимоверное вам спасибо! :)
Только это.... как я снова куплю нормальный человеческий монитор - каковы могут быть изменения? :D

Страница 1 из 1 Часовой пояс: UTC + 3 часа
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/